Home Groups Discontinued ALI Audio line isolator

ALI Audio line isolator


The ALI20MK is an audio line isolator designed to isolate audio devices from each other. In most cases, they are used to avoid hum caused by ground loops in audio systems. They offer a completely passive solution for the isolation of a stereo-balanced audio signal. It features dual XLR in- and output connectors and a ground lift switch. The in-and output phases are matching. The ALI20MK2 is built with an audio transformer that has a turns ratio of 1:1 and an impedance of 600 Ohm. The ALI20MK2 contains a shielded transformer that complies with the requirements of most standard applications. This ensures the best results in even the highest EMI polluted environments.

Variant MSRP
Shielded AUALI20MK2 POA
Super shielded AUALI25 POA
Would you like a Demo?
  • S-box™ modular multifunctional enclosure
Inputs Impedance : 600 Ω
Inputs Connector : 2 x XLR female
Outputs Impedance : 600 Ω
Outputs Connector : 2 x XLR male
Turn ratio : 1 : 1
Bandwidth : 0.8 Hz - 100 kHz
Typical distortion (@ 1 kHz) : 0.001%
Frequency High : -3 dB Cutoff 105 kHz
Frequency Low : -3 dB Cutoff 0.8 Hz
Response 20 Hz : -0.09 dB (reference 1 kHz)
Response 20 kHz : -0.10 dB (reference 1 kHz)
Max. Inputs Level (@ 1% THD+N) 20 Hz : +2 dBu (0.975V)
Max. Inputs Level (@ 1% THD+N) 50 Hz : +10 dBu (2.449V)
THD+N (@ 1 kHz) : < 0.001% (@ 1 kHz and -20dBu (typical))
THD+N (@ 1 kHz) : 0.035% (@ 20 Hz and -20dBu (typical))
Colours : Black
Dimensions : 96 x 43 x 108 mm (W x H x D) (ALI25)
Dimensions : 108 x 44 x 165 mm (W x H x D) (ALI20MK2)
Weight : 0.270 kg (ALI25)

*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up to date specifications and product details www.audac.eu For the most up to date Software and Firmware visit www.audac.eu.